Tools: Delta Planers 13" | 20" | 24"

Delta 22-590 13'' Portable Planer

• Use this portable Delta Planer right out of the box to cut custom thicknesses of any stock.
• Powerful 15A, 120V, 1-phase motor
• Three razor-sharp knives turn 10, 000 times a minute
• Cuts stock as wide as 13" and as thick as 6"

DELTA 22-450 DC-580 20" Planer

The DELTA 22-450 includes Three Phase, 5 HP motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rollers, polyurethane outfeed roll, sectional chip-breakers, dust chute, knife-setting gauge, wrench

• Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.
• Large precision-ground table contains two adjustable bed rolls for smooth feeding of uneven stock.
• Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick set-ups. Conveniently placed to the right, a large handwheel with locking knob adjusts table height.
• Sectional serrated steel infeed roller with sectional chip breakers for planing uneven stock.

DELTA 22-451 DC-580 20" Planer

The DELTA 22-451 includes single phase, 5 HP motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rollers, polyurethane outfeed roll, sectional chip-breakers, dust chute, knife-setting gauge, wrench

• Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.
• Large precision-ground table contains two adjustable bed rolls for smooth feeding of uneven stock.
• Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick set-ups. Conveniently placed to the right, a large handwheel with locking knob adjusts table height.
• Sectional serrated steel infeed roller with sectional chip breakers for planing uneven stock.

DELTA 22-470 24" Planer 22-470

The DELTA 22-470 includes 7-1/2 HP, Three Phase motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rolls, polyurethane outfeed rolls, sectional chipbreakers, dust chute, knife-setting gage, wrench

• Standard-equipment knife-setting gauge is included for accurately setting the three-knife cutterhead.
• Hinged side panel access doors make it easy to change feed rate speed from 20 to 30 feet per minute.
• Sectional serrated steel infeed roller with sectional chip breakers for planing uneven stock.
• Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.
• Micro-adjustable bed rollers lever quickly raises and lowers bed rolls.